The controller turns on when the boiler temperature exceeds the user-set central heating pump activation temperature. The DHW pump works on the basis of a temperature difference. The DHW pump is switched on when the boiler temperature exceeds the tank temperature by the hysteresis set by the user. The hot water pump works until the boiler and tank temperatures equalize or the set tank temperature is reached.
Product features:
Power supply | 230V AC 50Hz |
---|---|
Max load of the CH pump output | 3 (1) A |
Max load of the DHW pump output | 3 (1) A |
Temp. measurement range | 0 – 99°C |
Setpoint temp. range for CH | 5 – 80°C |
Setpoint temp. range for DHW | 20 – 80°C |
Sensor temp. range | -10 – 120°C |
CH sensor cable lenght | 1,5m |
DHW sensor cable lenght | 3m |
Dimension [mm] | 155 x 70 x 39 |
plug&play
pump „anti-stop” function
manual mode
sound alarm
frost protection
DHW priority function
summer mode