Heat pump and underfloor heating - a perfect combination - ENGO

Heat pump and underfloor heating – a perfect combination



Both heat pumps and under floor heating are popular solutions lately. But what if they were combined? What would be the result? Let’s find out why users are increasingly opting for a heat pump for underfloor heating, what speaks in favor of this combination, and which heat pump for underfloor heating to choose.

Maximizing energy efficiency – heat pump and underfloor heating

Heat pumps are heating devices distinguished by the lack of need to power them with fuel. They extract energy from natural sources present in the environment: from the ground, water, or air. The thermal energy is then transferred to the heating system of the building. Underfloor heating is an installation consisting of pipes distributed in the building under the floor. The system distributes heat evenly throughout the room.

Combining a heat pump with underfloor heating is a solution that has been implemented with increasing frequency recently. Why? It is a way to optimize the energy efficiency of a building. Underfloor heating systems are designed to work with a medium of relatively low temperature. Thus, heating a room through an underfloor system requires the production of a relatively small amount of energy, making it an energy-efficient solution. Due to the nature of its operation, the pump is also referred to as such, so the combination of it and underfloor heating is to maximize the effects in terms of improved heating efficiency. In other words, anyone looking for green and modern energy solutions should take an interest in the question of heat pump vs. underfloor heating. The rest of this article goes into more detail about the benefits of this combination.

Why is a heat pump and underfloor heating a good combination?

A heat pump and underfloor heating form a combination with many advantages. They are described below.

  • Energy efficiency – the heat pump’s use of natural heat, its low energy requirements, and the low temperature of the medium in the underfloor heating system make the combination of the two solutions save a lot of energy.
  • Thermal comfort – underfloor heating is an efficient system that guarantees even heat distribution. Added to this is the pleasant warmth of the ground. The pump ensures a constant supply of energy to power the heating system.
  • Ecology – using renewable energy sources, heat pumps are unquestionably ecological devices. As is underfloor heating, an installation with low energy requirements relative to other heating systems.
  • Aesthetics – resigning from traditional radiators in favor of a heating system hidden under the floor and placing the heat source in the basement means that the interior of the house can be freely arranged.

Which heat pump for underfloor heating

The variety of heat pumps today is very large. Therefore, the question arises what kind of pump for underfloor heating will be the best solution? Many factors need to be taken into account. Nevertheless, usually, the air-to-air model comes to the fore. This device does not require complex installation, and thus this type of heat pump for underfloor heating is a convenient solution. At the same time, it is an economical option due to the low cost of purchasing and operating the equipment. At the same time, it should be noted that a water or ground source heat pump versus underfloor heating is also often a good combination. Ultimately, therefore, it is worth simply consulting with professionals before making a decision.

How to set up a heat pump with underfloor heating?

The optimal positioning of the heat pump for underfloor heating is a key issue for the desired results of this combination. The key factors to consider are primarily the insulation of the building and the thermal properties of the substrate. Usually, however, the indicated temperature of the water in the system oscillates between 30-35°C.

The indicated temperature is lower than that in most other heating installations. Why? Well, underfloor heating has a larger heat distribution area than traditional radiators. This makes the heat spread evenly around the room. Wall radiators, on the other hand, are point sources of heat and it takes a much higher temperature to deliver it to the farther areas of the room. In addition, hotter water in an underfloor heating system would hurt the comfort of users, who might have difficulty walking on an excessively heated surface. Another contraindication to overheating the medium is the risk of damaging the floor.

Maximum optimization of heat pump and underfloor heating – modern management systems

To take full advantage of the potential of the combination of heat pump and underfloor heating, it is also worth investing in modern management systems. In our offer, you will find both advanced controllers for heat pumps, as well as wireless and wired floor heating control systems. Intelligent solutions guarantee maximum efficiency in the operation of the system. This translates into higher user comfort and lower energy consumption, thus saving money by being environmentally friendly.

Using the systems we offer, the user can monitor and adjust the operating parameters of the system to the current needs of the residents. Moreover, the advanced algorithms of the controllers can independently adjust the operation of the heat pump to the requirements of the underfloor, which minimizes the risk of improper operation of the system, as well as its failure.
A heat pump and underfloor heating is an energy optimization that serves both the user and the environment. It is worth considering this combination while remembering to choose the right heat pump for the underfloor. And then about the appropriate control.