Modern condensing boilers are very popular and are an excellent alternative to their traditional versions. They are characterized primarily by high efficiency and economy. Using them is also safe. Choosing the right home heating is a very important decision, and a condensing boiler can work perfectly. Find out what its advantages are and how it works.
A condensing boiler is a component of a heating system that is responsible for generating heat and distributing it to individual rooms. As the name of this device indicates, inside, in a closed chamber, the process of condensation, or condensation of water vapor from the flue gases, takes place. This recovers energy that can be reused. It is due to the process of condensation that such boilers have a much higher efficiency compared to traditional models.
There are single-function and double-function condensing gas furnaces on the market. They differ from each other primarily in their application. The former only supply the central heating system. They do not have heat exchangers, so they are not able to heat domestic water on their own. For this to be possible, it is necessary to use special heaters.
On the other hand, a condensing dual-function gas boiler heats water on a flow basis and both feed the central heating system and deliver it to the taps. It should be borne in mind that in the first moments after turning on the tap, cold water flows, which was in the pipes. Most often, it is only after several seconds that it has the desired temperature.
Condensing furnaces can successfully work with both traditional radiators and underfloor heating. This is possible because the device is compatible with a low-temperature system, and such is the underfloor. To increase the efficiency of such heating, it is worth using wireless and wired systems from Engo Controls. They allow you to conveniently control the temperature in individual rooms. This not only provides adequate comfort but also has a beneficial effect on reducing the expenses associated with heating. Thanks to regulators and controllers, it is easier to control the temperature level and ensure that it is not too low or too high.
Without a doubt, the most important advantage of such a furnace is its efficiency. It makes maximum use of the fuel burned and thus provides heat. The best condensing gas boilers are distinguished by an efficiency of up to 107-109%. This is possible due to the use of energy escaping during condensation of water vapor and cooling of flue gases.
The cost of purchasing such a furnace is higher than for a traditional model, but in the long run, it is a more cost-effective solution. All thanks to the mentioned efficiency. Such a boiler uses less fuel, and at the same time provides the optimal temperature. However, it is necessary to remember that it is essential to take care of the tightness of the heating system, as well as the quality of the fuel. The gas supplied to the boiler must not have impurities.
Condensing gas furnaces are automated and therefore virtually maintenance-free. In addition, it is worth equipping them with remote control systems via the Internet, which you will find in the offer of Engo Controls. Thanks to them you will be able to control the operation of your device even when you are away from home. Such a solution is not only comfortable but above all economical.
A modern boiler adjusts its operation mode to the conditions outside. It can be programmed to operate at full power when the ambient temperature is very low. On the other hand, on other days, when the demand for heat is much lower, the device will use fuel economically. Such action will translate into lower bills.
Listing the advantages of a condensing boiler, we can not forget about safety as well. It has a closed combustion chamber, and the air necessary to carry out the heat generation process is supplied from the outside through special pipes. As a result, the room in which the furnace is located is not cooled. Such a boiler is also safe since the exhaust gases are discharged to the outside.
Other advantages with which a condensing furnace is distinguished are:
– quiet operation;
– no need to store fuel;
– low operating costs;
– easy installation;
– stylish appearance and compact size.
In contrast, the biggest disadvantage of the boiler is its price. You have to pay significantly more for a modern model that is fully automated than for a traditional gas furnace. However, the investment is usually already returned within a few years thanks to the fact that a condensing boiler uses less fuel and is more efficient.
When choosing a condensing boiler, first of all, consider what functions it should perform. As you already know, it can only supply central heating, or it can also be used to prepare domestic hot water. Also, pay attention to the control automation with which a particular model is equipped and with which it can work. The more advanced the technology, the more comfortable the use of the device.
Condensing boilers are also divided by the method of installation into wall-mounted and floor-standing. The former is perfect for small rooms where there is not much space. A standing furnace is worth using, for example, in the boiler room, that is, where it will not interfere with normal operation. Such a model is usually more capacious than a wall-mounted boiler.
When choosing a condensing furnace, consider its power. This is a key parameter that must be matched to the size of the building, as well as its thermal insulation. The larger the volume and heat loss, the more power is needed.
When considering the type of heating in your home, consider installing a condensing gas boiler. This is an extremely efficient device that will allow you to save on fuel, with minimal effort during operation.